Back to Blog
How-to Guides 2026-11-18 Apollo Precision 0 views

Apollo Goliath 6-36×56: High Magnification Setup Tips

Apollo Goliath 6-36×56: High Magnification Setup Tips

Set up the Apollo Goliath 6-36×56 with a practical order: check eye relief, set parallax, use the locking turrets, and manage the 6-36× range at distance.

Set the scope up in the order the Goliath rewards

The Apollo Goliath 6-36×56 is a high-magnification long range scope, and that changes the setup order. Eye relief and cheek weld come first, because the 6-36× range is only useful if you can get behind the scope consistently. Parallax and turret discipline come next, and magnification choice comes last at the target.

The supplied record gives you the working numbers: 105–135 mm of eye relief across magnifications, a 30 mm one-piece tube, push-pull locking turrets, a 1/8 MOA click value, and side parallax from 10 yards to infinity. Use those as your checkpoints rather than guessing.

Goliath setup facts to keep beside the rifle

  • Apollo Goliath 6-36×56: Wide eye relief of 105–135 mm across all magnifications. This is the range to mount within, and it is wide enough that you can set a comfortable stock position before tightening anything.
    Apollo Goliath 6-36×56
    Apollo Goliath 6-36×56
  • Apollo Goliath 6-36×56: Side parallax adjustment from 10 yards to infinity. Parallax is a focus and alignment control on this scope, so it belongs in your setup sequence before you judge image sharpness at high power.
  • Apollo Goliath 6-36×56: Push-pull locking turrets. Locking turrets are a field habit, not just a feature: push to adjust, pull to lock, then confirm the turret has not moved.
  • Apollo Goliath 6-36×56: 1/8 MOA click value. Fine clicks mean more turns for a given correction, so count deliberately and write down your come-ups.

A practical setup sequence for the Goliath

Work through these in order. Each step gives you a checkpoint before you move on, and none of them requires you to guess at a specification the record does not supply.

  1. 1. Set eye relief before you chase magnification: Mount the scope so your normal cheek weld falls inside the 105–135 mm eye relief window. Check it at both 6× and 36×, because the record describes eye relief as wide across all magnifications, not just at one setting.
  2. 2. Confirm the 30 mm tube is seated and stable: The one-piece 30 mm tube is described as strong, stable construction for consistent zero and long-range tracking. Treat ring fit and torque as a compatibility question for your mounting hardware, since the supplied record does not list a ring height or torque value.
  3. 3. Set side parallax for the distance you are actually shooting: Use the side parallax control to fine-tune focus from 10 yards to infinity. At high magnification, small parallax errors are easier to see, so adjust until the target and reticle settle together for your eye position.
  4. 4. Dial with the turrets unlocked, then lock them: Push-pull locking turrets let you make an adjustment and then secure it. Use the 1/8 MOA click value to count your correction, and lock the turret before you move or store the rifle.
  5. 5. Choose magnification last: The 6–36× range covers close target work through extreme long-range viewing. Start lower for field of view and mirage management, then zoom in only when the target and conditions support it.

How to use the 6-36× range without fighting it

High magnification is a tool with a tradeoff. At 36× the Goliath gives you a detailed sight picture, but it also magnifies mirage, wobble, and any parallax error. A practical habit is to zero and confirm at a moderate setting, then move up only for the shot or observation that needs the extra detail.

The 56 mm objective is described as delivering a bright, crisp sight picture even at max zoom. That helps at 36×, but it does not remove the need to set parallax and eye relief correctly. Treat brightness as a supporting feature, not a substitute for setup.

Turret setup: fine clicks, clear records

The 1/8 MOA click value is finer than many scopes, which is useful for long-range precision but easy to lose track of. Count clicks in full turns, write down your zero and your come-ups, and return the turret to a known setting after each stage. The push-pull locking design gives you a simple confirmation step: if the turret is locked, it should not move under handling.

The supplied record does not include a zero-stop procedure, turret revolution count, or a specific torque specification. Those are gaps in the supplied information, not features the scope is confirmed to lack. If you need those details, check the manufacturer documentation that comes with your scope.

What the Goliath record confirms and what it leaves to you

Confirmed by the supplied record: 6–36× magnification, 56 mm objective, 30 mm one-piece tube, 105–135 mm eye relief, 1/8 MOA clicks, push-pull locking turrets, side parallax from 10 yards to infinity, nitrogen purging and fogproof construction, a long-range reticle, and airgun-rated shockproof durability.

Not supplied: ring height, mounting torque, exact reticle subtensions, turret travel, and a zeroing distance. Those are decisions you or your mounting hardware will determine. The Goliath gives you a broad magnification range and a fine click value; your setup discipline is what turns those into repeatable long-range results.

Related Articles

Customer Service
Home
Products
Cart
Profile