Back to Blog
Product Reviews 2026-11-17 Apollo Precision 0 views

Ember Micro Red Dot: Mounting, Zeroing, and Setup Questions Answered

Ember Micro Red Dot: Mounting, Zeroing, and Setup Questions Answered

Straight answers to the most common Apollo Ember questions: RMSc footprint and Picatinny mounting, zeroing, battery and brightness, reticle options, and waterproofing.

Mounting and compatibility

Will the Ember fit my pistol?
The Ember uses the RMSc footprint. It mounts directly to RMSc-cut slides. If your slide is cut for a different footprint, the supplied information does not confirm compatibility, so check your slide's cut before ordering.
Can I mount the Ember on a Picatinny rail?
Yes. Apollo includes a Picatinny adapter with the Ember, so you can mount it on a rail-equipped pistol, pistol-caliber carbine, or other Picatinny platform without a separate adapter purchase.
Does the Ember come with mounting hardware or a torque spec?
The supplied product information mentions the included Picatinny adapter but does not list mounting screws, thread sizes, or a torque specification. Follow the hardware and instructions that come with your Ember and your slide or mount; do not guess a torque value.

Ember mounting facts

  • Ember: RMSc footprint with an included Picatinny adapter. This is the key compatibility detail: direct fit on RMSc-cut slides, plus rail mounting with the included adapter.
    Ember
    Ember
  • Ember: Larger protective hood than earlier generations. More housing around the lens and emitter matters if the optic will see hard use or bumps.

Zeroing and reticle

What reticle does the Ember have?
The Ember has a 3 MOA red dot with a multi-reticle system, so you can choose among multiple reticle options to match your shooting style. The 3 MOA dot is small enough for distance work but still visible up close.
How do I zero the Ember?
The supplied information does not include a step-by-step zeroing procedure or click values. Zero it the same way you would any red dot: confirm the mount is secure, start at a short distance, and adjust windage and elevation until point of impact matches point of aim. Because the Ember has more precise adjustments than earlier generations, make small changes and confirm each one.
Can I change the brightness while zeroing?
Yes. The Ember has 10 brightness levels adjusted electronically. Use a setting bright enough to see the dot clearly against your target without overwhelming it, then confirm your zero at that setting.

Battery, brightness, and daily use

How does the Ember save battery?
The Ember has a shake-awake style timeout with a micro switch time of about 225 seconds ±10 seconds. When the optic is idle, it powers down to conserve battery, then wakes when moved. It also has a memory function that returns to your last brightness setting.
What battery does the Ember use?
The supplied information does not specify the battery type or expected battery life. Check the battery compartment or the documentation included with your Ember before buying spares.
Is the Ember bright enough for daylight?
Apollo describes the emitter as high-output and brighter than earlier generations, with 10 brightness levels for low light through full daylight. That makes it usable in bright conditions, but the supplied information does not provide a measured brightness figure.

Durability and weather

Is the Ember waterproof?
Apollo lists IPX7-style waterproofing to 1 meter for 30 minutes. That covers rain and brief immersion, but it is not a claim of unlimited underwater use.
Will the Ember fog up in cold or hot weather?
The Ember is anti-fog tested with stable performance from –20°C to +50°C. That range covers typical cold-weather and hot-weather shooting, though you should still let the optic adjust if you move it between extreme temperatures.
How much impact can the Ember take?
Apollo lists impact testing to 1500G, with an ultimate test of up to 1800G over 5000 cycles. Those are lab figures, not a guarantee against every drop, but they indicate the housing is built for hard use.

Ember electronics and weather facts

  • Ember: 10 brightness levels with memory function; shake-awake timeout of about 225 seconds ±10 seconds. Explains how the Ember manages brightness and battery in everyday carry and range use.
  • Ember: IPX7-style waterproof to 1 m for 30 minutes; anti-fog tested from –20°C to +50°C; impact tested to 1500G. These are the supplied environmental limits, so you know what weather and rough handling the Ember is rated for.

What the Ember does not tell you

The supplied information does not include a battery type, click adjustment values, mounting screw sizes, or a torque specification. Those details matter for setup, so rely on the documentation and hardware included with your Ember rather than guessing. If you need a specific number before buying, ask Apollo Precision directly.

Related Articles

Customer Service
Home
Products
Cart
Profile